When the water pump is used for too long, it will inevitably have some problems of this kind, so what problems will be encountered in the process of using it? What is the specific solution? The editor of УРАП Water pump gives several common problems.
1. If the pump is unable to pump out the liquid, if there is no liquid filling, the pump needs to be refilled.
2. When the suction pipe, the outlet pipe or the flow passage of the pump is blocked, it is necessary to eliminate debris.
3. When there is no exhaust gas in the suction pipe or pump, the suction pipe needs to be repaired and the gas is exhausted.

4. When the suction height exceeds the allowable range, reinstall the pump according to the allowable suction height.
5. When the extruded pipeline is too thin and the pipeline loss is too large, replace the appropriate extruded pipeline.
6. If the use head exceeds the design head, the pump must be reselected.
7. When transporting hot and volatile media, reduce the suction stroke or use reverse filling.
8. When the steering is reversed, correct the steering immediately.
In summary, the editor of УРАП Water pump tells a few questions about knowledge, you can learn more about it through the above introduction.