Zetor Water pump tells how the pump is powered

A water pump is a machine that transports or pressurizes a liquid. It transfers the mechanical energy of the prime mover or other external energy to the liquid, increasing the liquid energy, and is mainly used to transport liquids including water, oil, acid-base liquid, emulsion, suspoemulsion and liquid metal. So do you know what the power supply method of the water pump is? Today, the Zetor Water pump editor will take you to a brief look at it.
1. Battery: It is a general term for batteries. Because the principle is different from that of dry batteries, it can provide larger current and power. It is widely used in water pumps and is also used in situations where there is a lack of power.

2. Commonly used dry batteries (such as 1.5V No. 1 battery) provide a small current due to their large internal resistance, and a large part of the voltage is consumed by the internal resistance, so the voltage drops faster, from power, use Time to consider is suitable for powering the good Kaide vacuum pump.
3. Because the extracted medium is "water or liquid", the specific gravity is large. The working medium is "gas", which has a lighter specific gravity. Therefore, the working current is generally larger than the latter, about 1~10 amperes, while the working current of the latter is generally not large, ranging from several hundred milliamps to several amperes.
The above is a brief introduction of Zetor Water pump Xiaobian: a brief introduction to the relevant knowledge about the power supply method of the water pump.