quality Zetor Water pump tells the reasons why the pump has insufficient flow

In agricultural production, pumps are the main irrigation and drainage machinery. my country's rural areas are vast, and a large number of pumps are needed in rural areas every year, and agricultural pumps account for more than half of the total pump output. In the mining and metallurgical industries, pumps are also used more equipment. The mine needs to be drained by pumps, and in the process of beneficiation, smelting and rolling, pumps are needed to supply water. So what are the reasons for insufficient flow when we use the water pump? The quality Zetor Water pump editor will take you to a simple understanding.
1. Air enters the pump body.
2. The impeller turns wrong.
3. The lift is too high.
4. The filter is blocked.
5. The impeller is worn.
6. The sealing ring is worn too much, or the impeller is damaged.
7. The speed of the pump is lower than the rated value.
8. The impeller or water inlet pipeline is blocked.
The above is the small series of quality Zetor Water pump: a brief introduction to the reasons for the insufficient flow of the pump during use.

Key words:

Automotive Parts

2022-02-01

Zetor Water pump tells about the corrosion phenomenon of water pump

2022-01-25

Zetor Water pump tells how the pump is powered

2022-01-18

Best MT3 1221 Water pump introduces the reasons for the heat of the water pump and the troubleshooting methods

2022-01-11

What problems should be paid attention to during the operation of Best MT3 1221 Water pump

2022-01-06

MT3 1221 Water pump introduces ways to reduce energy consumption of water pumps in summer